The SY020 can be linked to any frequency generating device e.g. flow meters, which gives TTL, pulse Reed switch or coil output, converting the frequency to an analogue signal. This can be 4-20mA loop current or a voltage output. The 4-20mA ..
When a frequency output device like a flow meter gives insufficient pulses to give the accuracy you need, or too many pulses for your PLC or frequency counter to handle, or if you have more than one frequency output device and the rate..
The SY024 PR* is a frequency to analogue converter designed to accept a frequency and produce a proportional Current or Voltage output. The current output can be 0-20mA or 4-20mA and the voltage output version will be 0-10V out.
The SY024RAR is a Rotary Angle Resolver, it is designed to link to rotary encoders and give either a current or a voltage output proportional to the angle. At each pulse input the output increments towards the full scale output, then r..
The SY024 ramp generator is used to create a ramping 4-20mA or 0-20mA linear signal which is ideal for driving a proportional valve. The time it takes to reach 20mA is programmable by the rotary switches in 10msec steps up to 99.99secs. The..
The SY0485 serial converter connects to an industrial PC serial port or a PLC serial port and enables multiple drop communications over an RS232 network which is designed for simple two way communications.
SY057 provides a convenient way of splitting a master encoder signal across multiple drives or motion controllers. Its compact design and technical features makes it a perfect solution for sending material encoder solutions to more than one..