Our load cell amplifiers use signal conditioning to convert the millivolt signals from Wheatstone bridges into a current or voltage. These can incorporate trip relays or be in a digital format, delivering data directly to a PC. Talk to us for help or advice.
The SD035-ICA is a miniature in-cell bridge amplifier, it has been designed to fit inside majority of load cells, pressure and torque transducers providing signal conditioning. Two options are available, a 2-wire version or a..
The SY008 is offered in three different types;
SY008-VI: 0-5V to 4-20mA converter
SY008-SGC: Universal loadcell amplifier current out
SY008-SGV: Universal loadcell amplifier Voltage out
The SY008-VI Sensor Si..
SY011 load cell amplifier is a compact versatile in-line bridge amplifier capable of driving up to 4 x 350R load cells with 24V nominal input voltage. The SY011 load cell amplifier has an added advantage of ability to run on a low..
The SY016 is a self-contained 20 bit digital amplifier with a programmable gain of up to 128 X which is user settable via the software supplied and it can provide excitation for up to four 350Ω bridges and takes 470 measurements per second...
The SY028 TRIP amplifier is distinguished by its built in alarm functionality, it accepts millivolt inputs and switches each of two setpoint relay outputs for high and low level trips. The amplifier's characteristic hig..
The SY028UV is specifically designed for automotive applications. When supply voltage is limited to a unipolar voltage out amplifier with an output range of 10mV to 5V(with a 10k load). The amplifier requires 8V of excitation to operate&nbs..
The smallest, plug and play load cell strain gauge amplifier/data acquisition module. Data is transfered from up to 4 x 350ohm strain gauge bridges direct to your PC in real time, the unit require a very low voltage supply and can be p..
The SY036 digital strain gauge amplifier is a self contained unit which provides excitation for up to four 350Ω bridges and measures both strain and temperature. When more than one strain gauge bridge is connected the amplif..
The SY038 is a strain gauge bridge amplifier. A Variable gain functionality using miniature dip switch enables the user to select one of 16 ranges for transducer outputs as low as 0.25mV/V up to 4.4mV/V (higher if specif..
The SY039 LVDT signal conditioner is a versatile, compact module that accepts a wide range of sensitivities from LVDT, RVDT, and half bridge sensors. The SY039 will work with almost any LVDT due to the 8 selectable gain rang..
The SY046 strain gauge amplifier is an analogue amplifier with the digital gain advantages, it can excite up to 4 x 350Ω bridge transducers and provides either a 4 – 20mA, 0 – 5V or 0 – 10V output with a remotely triggered zero offset. This..
The SY047 is a compact 24 bit dual channel digital strain gauge amplifier with a variable user selectable digital gain. It is characterised by simultaneous conversion of 2 input channels, the conversion rate can be set with eight ..