Synectic's Digital Load cell strain gauge amplifiers provide the excitation voltage to ensure a true ratiometric measurement, they transmit the measurements from the millivolt direct to the computer as a number proportional to the load. The scaling is performed in the computer programme with the exception of the SY036 which transmits a scaled reading which can be transmitted live or downloaded from an on board logger. The digital amplifiers are without exception enclosed in small packages. A variety of ascii code commands can be used to communicate with them to get the best functionality from these high quality measurement instruments.
The SY016 is a self-contained 20 bit digital amplifier with a programmable gain of up to 128 X which is user settable via the software supplied and it can provide excitation for up to four 350Ω bridges and takes 470 measurements per second...
The smallest, plug and play load cell strain gauge amplifier/data acquisition module. Data is transfered from up to 4 x 350ohm strain gauge bridges direct to your PC in real time, the unit require a very low voltage supply and can be p..
The SY036 digital strain gauge amplifier is a self contained unit which provides excitation for up to four 350Ω bridges and measures both strain and temperature. When more than one strain gauge bridge is connected the amplif..
The SY046 strain gauge amplifier is an analogue amplifier with the digital gain advantages, it can excite up to 4 x 350Ω bridge transducers and provides either a 4 – 20mA, 0 – 5V or 0 – 10V output with a remotely triggered zero offset. This..
The SY047 is a compact 24 bit dual channel digital strain gauge amplifier with a variable user selectable digital gain. It is characterised by simultaneous conversion of 2 input channels, the conversion rate can be set with eight ..